MAX4596DBVR |
RFQ for MAX4596DBVR Required Field |
 |
| Technical/Catalog Information | MAX4596DBVR |
| Vendor | Texas Instruments (VA) |
| Category | Integrated Circuits (ICs) |
| Type | Switch |
| Voltage Supply Source | Single Supply |
| Voltage - Supply, Single/Dual (±) | 2 V ~ 5.5 V |
| Circuit | 1 x SPST- NO |
| On-State Resistance | 10 Ohm |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 |
| Packaging | Digi-Reel? |
| Current - Supply | 1A |
| Operating Temperature | -40°C ~ 85°C |
| Function | Switch |
| Drawing Number | 296; 4073253-4; DBV; 5 |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | MAX4596DBVR MAX4596DBVR 296 17653 6 ND 296176536ND 296-17653-6 |
| Product | Manufacturers | Pack | D/C |
| MAX4596DBVR | - | - | 07+ |
The MAX4596 is a single-pole single-throw (SPST) analog switch that is designed to operate from 2 V to 5 V. This device can handle both digital and analog signals, and signals up to V+ (peak) can be transmitted in either direction.
Typical Application |
Features |
| Sample-and-Hold CircuitsBattery-Powered EquipmentAudio and Video Signal RoutingCommunication Circuits | Low ON-State Resistance (10 )ON-State Resistance Flatness (1.5 )Control Inputs Are 5.5-V TolerantLow Charge Injection (5 pC Max)300-MHz −3-dB Bandwidth at 25oCLow Total Harmonic Distortion (THD) (0.05%)2-V to 5.5-V Single-Supply OperationSpecified at 5-V and 3.3-V Nodes−83-dB OFF Isolation at 1 MHzLatch-Up Performance Exceeds 100 mA PerJESD 78, Class II0.5-nA Max OFF LeakageESD Performance Tested Per JESD 22 − 2000-V Human-Body Model (A114-B, Class II) − 1000-V Charged-Device Model (C101)TTL/CMOS-Logic Compatible |
MIN MAX |
UNIT | ||
| V+ Supply voltage range | −0.3 6 |
V | |
| VNO VCOM Analog voltage range |
−0.3 V+ + 0.3 |
V | |
| IK Analog port diode current | VNO, VCOM < 0 | −50 |
mA |
| INO ICOM On-state switch current |
VNO, VCOM = 0 to V+ | −20 20 |
mA |
| INO On-state switch current ICOM (pulsed at 1 ms, 10% duty cycle) |
VNO, VCOM = 0 to V+ | −40 40 |
mA |
| VI Digital input voltage range | −0.3 6 |
V | |
| IIK Digital input clamp current | VI < 0 | −50 |
mA |
| I+ Continuous current through V+ | 100 |
mA | |
| IGND Continuous current through GND | −100 |
mA | |
| JA Package thermal impedance | DBV package | 206 |
SupplierPost a Buying LeadPDF / DatasheetRelated PDFRelated Models |
